Administrator Guide

Configuring Microsoft broker connection settings
Use the Microsoft Broker connection settings page to configure the Microsoft broker connections for ThinOS 8.5 and later version
devices.
Table 73. Configuring basic settings
Option Description
Broker Server Enter the broker server host name or IP address.
NOTE: You must specify between HTTP:// or HTTPS://.
Sessions to connect automatically Select this option to automatically connect to the session.
NOTE: Name of the desktop or application is case
sensitive. Use a semi-colon to separate the multiple
sessions which must be initialized automatically.
Configuring Microsoft RDP connection settings
Use the Microsoft RDP Settings page to configure the Microsoft RDP connection settings for ThinOS 8.5 and later version devices.
Table 74. Configuring basic settings
Option Description
Enable NLA Select this option to enable Network Level Authentication. User
authentication is required to establish a connection with the server.
Enable Recording
Select this option to enable recording.
Force Updated NLA Select this option to enable the client to force the RDP server to
use updated CredSSP. The RDP client disconnects the session
during set up when the RDP server uses unpatched CredSSP.
Table 75. Configuring RDP8 settings
Option Description
Bitmap Codec RemoteFX Select this option to enable the RemoteFX Bitmap Codec option.
The default value is yes. Dell recommends that you select No for
Wyse 3010 thin clients and Wyse 3020 thin clients.
Enable TS MM Select this option to enable multimedia redirection for terminal
server.
Force Span Select this option to enable the force span of the view. If you
enable the span option, the remote desktop becomes a rectangle
which equals to the area of your local monitors.
RemoteFX graphic channel Select this option to enable RemoteFX graphic channel.
UDP Traffic Channel Select this option to enable RDP 8 UDP traffic channel. The default
value is yes.
Video Optimized VOR Select this option to enable RDP 8 video optimized redirection. The
default value is yes.
Table 76. Configuring advanced settings
Option Description
USB Redirection Technology Select this option to enable USB redirection. USB redirection is a
technology that allows you to access the USB devices that are
connected to the thin client from within a remote desktop or
application. You can either select VMware PCoIP or Wyse Thin
Client Extensions (TCX) USB redirection.
50 Managing groups and configurations