Administrator Guide

Table 59. USB redirection settings
Option Description
Force Redirect Enter the force redirect device ID.
Force Local Enter the force local device ID.
Redirect Type From the drop-down list, select the redirection type.
NOTE: If PCoIP or Blast connection type is selected,
then do not select any value.
Interface Redirect Select this option to enable the interface redirection option.
Configuring third party authentication settings
Use Third party authentication settings page to configure Single Sign-On (SSO) authentication settings for ThinOS 8.5 and later
version devices.
Table 60. Configuring authentication settings
Option Description
Authentication Mode Select this option to specify the authentication mode. From the
drop-down menu, select any one of the following options:
• Imprivata
• Caradiam
• SecureMatrix
• HealthCast
Table 61. Configuring RF-ID settings
Option Description
Rf-Id Disable Beep Select this option to disable RFID beep. Radio-
Frequency Identification—RFID is the use of radio waves to read
and capture information stored on a tag attached to an object. A
tag can be read from up to several feet away and does not need to
be within direct line-of-sight of the reader. RFID authentication
provides a quick access to a system to perform short tasks, you
can use fast user identification through radio-frequency
identification (RFID).
Disable Keystroke Select this option to disable keystroke functionality. A keystroke is
a single press of a key on a keyboard. Each key press is a
keystroke. The keyboard is used as an input port for sending
signals.
Set Card Type Select this option to set the card type. RFID cards contain an
integrated circuit and an antenna, which are used to transmit data
to the RFID reader which is also known as an interrogator.
Disable Initialization Select this option to disable the RFID authentication.
Disable LED Select this option to disable the LED.
Table 62. Configuring imprivata settings
Option Description
Imprivata OneSign Server Enter the host name or the IP address with optional TCP port
number or URLs of the imprivata OneSign server.
Kiosk Mode Select this option to enable the kiosk mode. If enabled, then
different OneSign user can unlock the client desktop.
Managing groups and configurations 45