Administrator Guide

ManualsBrandsDell ManualsConverged InfrastructureWyse Management Suite

Option Description

Map Disks Select this option to enable map disks. You can automatically

connect the USB drives for ICA and RDP connections when the

session starts.

Disks Read Only Select this option to enable read-only disks.

Enable USB Redirection Select this option to redirect the USB drives to the remote session.

From the drop-down list, select your preferred option. If Exclude

some devices option is selected, you can exclude the following

devices from the session:

• Exclude disk devices

• Exclude audio devices

• Exclude printer devices

• Exclude video devices

Display on desktop (8.6+) From the drop-down list, select any of the following options:

• All

• None

• Desktops

• Applications

• Others

Enable Whitelist or Disable Blacklist Use this option to enable whitelist or disable blacklist. By default,

Do not enable whitelist or blacklist is selected.

NOTE: The device restarts when you enable this option.

The following options are displayed when you select Enable

whitelist or Enable blacklist:

• Class

• USB Class

• Vendor ID

Table 58. Configuring advanced settings

Option Description

Reconnect After Disconnect Select this option to reconnect the connection automatically after

the connection is disconnected.

Multi-Monitor Select this option to enable the multi-monitor support. The height

and width of the session desktop is similar to the local virtual

desktop size.

Turn Compression off Select this option to compress the file size and to reduce the time

required to download the files.

Optimize for low link speed Select the check box to optimize session settings for low link

speed.

Full Screen Mode Select this option to set the connection window in the full screen

mode.

Fast Disconnect Key Select this option to use the fast disconnect key.

NOTE: To disconnect from the sessions, press the F12

key.

Configuring USB redirection settings

Universal Serial Bus (USB) redirection is a technology that enables you to plug an external device into a USB port on the endpoint and

access the device from within a remote desktop or application. You can configure the USB to redirect automatically to a particular device.

Use the USB redirection settings page to force redirect the USB connected devices to the remote session for ThinOS 8.5 and later

version devices.

Managing groups and configurations