Administrator Guide

Configuring general settings
Use the General Settings page to configure the thin client general settings, such as auto power settings, local settings, mirror file server
settings, and terminal settings for ThinOS 8.5 and later version devices.
Table 12. Configuring general settings
Option Description
Auto Power The Auto Power check box specifies about how the system starts
when the power is first applied to the unit.
Table 13. Configuring keyboard options
Option Description
Load the language file Select this option to install the language files on ThinOS devices.
System Language Select this option to set the language for the system. From the
drop-down list, select your preferred option.
Locale file name Select this option to select the certificate to install on the device.
From the drop-down list, select the certificates added in the file
repository.
Font file name Select this option to select the font file to install on the device.
From the drop-down list, select the font files added in the file
repository.
Table 14. Configuring mirror file server
Option Description
Mirror File Server If the FileServer is offline, this setting allows you to store a local
copy of the configuration in cache.
Table 15. Configuring terminal settings
Option Description
Terminal Name Enter the terminal name. You can also use the system variables to
automate renaming multiple devices.
NOTE: If you make any changes to this settings, the thin
client reboots. From ThinOS 8.5_020 onwards, you can
delay the reboot by enabling the Reboot Reminder
option in General settings.
Terminal Reboot If this setting is enabled, the system is forced to restart after the
terminal name is changed. Restart the system to view the changes.
Inactive Select this option to restart or shut down the system depending on
the option you have selected from the Action after All Sessions
Exit drop-down list in the Visual Experience policy setting for the
ThinOS devices. Enter the time value in minutes. The range of
inactive time is 0–480 seconds.
No Session Timer Select this option to restart or shut down the system depending on
the option you have selected from the Action after All Sessions
Exit drop-down list in the Visual Experience policy setting for the
ThinOS devices. Enter the time value in minutes. The range of
inactive time is 0–480.
NOTE: This setting only applies if the Inactive value is
set to 0.
Managing groups and configurations 27