Administrator Guide

Wireless profiles password editor

This Wireless profiles password editor is used to capture the wireless profiles and edit the passwords. The profiles are saved in an XML

file. The same XML file can be used to configure the Wyse Management Suite through Cloud Client Manager.

NOTE:

.NET Framework 4.5 must be installed to run this tool on any Windows operating system or Windows Embedded

operating system.

Topics:

• Configuring windows wireless profile

• Configuring the Wireless Profiles Password Editor

• Limitations of Wireless Profiles Password Editor

Configuring windows wireless profile

To configure the windows wireless profile, do the following

1. Go to, C:\Program files\Wyse\WDA\bin\<DWirelessProfileEditor.exe>.

2. Right-click the .exe file and select the Run as administrator option.

The Wireless Profiles Password Editor window is displayed.

3. Click Browse and select the location to save the new XML profile.

4. Click Save.

5. From the Profiles drop-down list, select the wireless network.

Click Change password to change the password if required.

6. Click Export WIFI Profiles to save the profile.

NOTE:

The exported file can be imported from the Wyse Management Suite Apps & data inventory page to push it to

the devices.

Configuring the Wireless Profiles Password Editor

To configure the wireless profiles password editor, do the following:

1. Go to, C:\Program files\Wyse\WDA\bin\<DWirelessProfileEditor.exe>.

2. Right-click the .exe file and select the Run as administrator option.

The Wireless Profiles Password Editor window is displayed.

210 Wireless profiles password editor