Administrator Guide

Managing system setup
This section provides the information about the following:
1. Log in to the Wyse Management Suite portal and click the Portal Admin tab.
2. Click Setup under Systems.
3. Select the check box to perform server certificate validation for all device-to-server communication.
4. Enter the following details in the Update SMTP for Email Alerts area:
• SMTP server
• Send from address
• Username
• Password
• Test address
Current Certificate: Select the Certificate Validation check box to enable the CA validation for private cloud. All the
communication from the server and the client including file download, OS image download from Local Repo uses the certificate.
NOTE: To enable CA Validation for remote repository, go to Portal Administration > File Repository > Select the
Repository > Edit > Enable CA Validation > Save Settings.
NOTE:
• a. When CA Validation from Wyse Management Suite server is enabled, the certificate should be present in the
client. All the operations such as, Apps and Data, Image Pull/Push is successful. If certificate is not present in
the client, the Wyse Management Suite server provides one generic audit event message Failed to Validate
Certificate Authority under Events page. All the operations such as, Apps and Data, Image Pull/Push is not
successful.
b. When CA Validation from Wyse Management Suite server is disabled, then the communication from server
and client happens in secure channel without Certificate Signature validation.
5. Select the following options and enter the details:
• Key/Certificate: Upload HTTPS key/certificate file pair (only PEM format is supported).
• PKCS-12: Upload HTTPS PKCS-12 (.pfx, .p12). Apache intermediate certificate is required for IIS pfx.
6. To update the external MQTT details, click the Change External MQTT option and configure the details.
7. To update the external Wyse Management Suite URL, click the Change External WMS URL option and configure the details.
NOTE: To revert to the previous configurations click the Revert Last URLs option, and the click Save.
8. Click Save.
188
Portal administration