Administrator Guide

Option Description
• Internet Explorer
• RDP
Exit From Appliance Mode Select this option to exit from the appliance mode by using a
shortcut key.
Table 288. Power settings
Option Description
Device Power Plan Select this option to select a power plan for your device. From the
drop-down menu, select either of the following options:
• Balanced
• Power Saver
Table 289. Power settings on battery
Option Description
Device Sleep Plan (on battery) Select this option to set the time after which your device goes to
sleep mode. From the drop-down menu, select a delay time.
Dim Display (on battery) Select this option to set the time after which the display is dimmed.
From the drop-down menu, select a delay time.
Turn Off Display (on battery) Select this option to set the time after which the display is turned
off. From the drop-down list, select a delay time.
Table 290. Power settings when plugged-in
Option Description
Device Sleep Plan (plugged-in) Select this option to set the time after which your device goes to
sleep mode. From the drop-down menu, select a delay time.
Dim Display (plugged-in) Select this option to set the time after which the display is dimmed.
From the drop-down menu, select a delay time.
Turn Off Display (plugged-in) Select this option to set the time after which the display is turned
off. From the drop-down menu, select a delay time.
Table 291. Configuring shared drives
Option Description
Shared Drive Select this option to add a shared drive to your device. Click Add
Shared Drive. Enter the share name, remote drive path, user
name, and password for the shared drive.
NOTE: To delete a shared drive from the list, select the
shared drive that you want to remove and click Remove.
Table 292. Clock settings
Option Description
Clock1 Select this option to configure Clock 1 on your device.
After you enable Clock1, set the Display Name for the clock. From
the drop-down menu, select the Time Zone for Clock 1.
Clock2 Select this option to configure Clock 2 on your device.
After you enable Clock 2, set the Display Name for the clock.
From the drop-down menu, select the Time Zone for Clock 2.
130 Managing groups and configurations