Administrator Guide

Configuring language settings
Use the Language page to configure the language settings.
Table 263. Configure language settings
Option Description
Language From the language drop-down list, select the language for Object
Storage Device (OSD) user interface.
Keyboard Layout From the keyboard layout drop-down list, select the layout for the
OSD.
Configuring company logo settings
Use the Company Logo page to configure the company logo settings.
Table 264. Configuring company logo settings
Option Description
Logo file From the drop-down list, select the required logo file. The Teradici
OSD logo files located in the File Repository Inventory page are
loaded.
NOTE: The logo image must be a 24 bitmap which does
not exceed 256 resolutions by 24 resolutions. Any other
image with different properties is not displayed or is
displayed incorrectly.
Use logo for view banner Select the check box against the logo banner that you want to be
displayed.
Configuring video settings
Use the Video page to configure the video settings.
Table 265. Configure video settings
Option Description
Minimum Image Quality Enables you to change the image quality and frame rate when
network bandwidth is limited. Some use cases may require lower-
quality images at a higher frame rate while others need higher-
quality images at a lower frame rate. In environments where the
network bandwidth is constrained, select Reduced to enable
higher frame rates. Select towards Perception-Free to enable
higher image quality. When network bandwidth is not constrained,
the PCoIP system maintains perception-free quality regardless of
the Minimum Image Quality parameter. Note: The Maximum Initial
Image Quality must be greater than or equal to the Minimum Image
Quality.
Maximum Image Quality Select towards Reduced to reduce the network bandwidth peaks
caused by screen content changes, but produce lower quality
images. Select towards Perception-Free to produce higher quality
images but also higher bandwidth peaks. This parameter limits the
initial quality on the first display frame of the screen change.
Unchanged regions of the image are built to a lossless state
regardless of this parameter. Note: The Maximum Initial Image
Quality must be greater than or equal to the Minimum Image
Quality.
Managing groups and configurations 121