Administrator Guide

Table 236. Configure power management settings
Option Description
USB Wake Support Select the check box to allow the thin client to power up from the
off state.
Wake On LAN From the drop-down list, select an option to allow the thin client to
power up from the off state. You can trigger a thin client to power
up from the off state by using a LAN signal or a wireless LAN
signal.
AC Recovery From the drop-down list, select an option to specify how the
system must behave when the AC power is restored.
Table 237. Configure auto-on settings
Option Description
Auto On From the drop-down list, set the time of day you want the system
to turn on automatically.
Table 238. Configure post behavior settings
Option Description
Numlock LED Select the check box to turn on the NumLock LED light when the
systems restarts.
Keyboard Errors Select the check box to display the keyboard related errors when
the systems restarts.
Fastboot From the drop-down list, select an option to increase speed of the
restart process.
Extend BIOS POST Time From the drop-down list, select a delay time to see the post status
messages.
Table 239. Configure reboot schedule
Option Description
Reboot Option Some BIOS settings requires the system to restart. From the drop-
down list, select one of the following options:
• Reboot immediately—The system restarts immediately.
• Reboot later—Select the Reboot Hour and Reboot Minute
to set the system restart time.
• Do not reboot—The system does not restarts.
Configuring BIOS settings for Wyse 5070 thin client with
ThinLinux
Use the BIOS settings page to configure the BIOS settings for Wyse 5070 thin client with ThinLinux.
Table 240. Configure general settings
Option Description
Device Notes Enter the device notes in the provided field. For example, property
ownership tag.
Table 241. Configure system settings
Option Description
Enable Audio Select this check box to enable the audio device.
114 Managing groups and configurations