Administrator Guide

Table 217. Configuring other settings
Option Description
Auto Power-On Select this option to enable the system to boot when power is
restored without waiting for the user to press the power button.
NOTE: This option is not supported in ThinLinux 2.0
Power Button Action From the drop-down menu, select any one of the options:
• Interactive
• Restart
• Shutdown
• None
The options define the action to be taken when you press the
power button.
DHCP Vendor ID Select this option to change the DHCP Vendor ID. The default
Vendor ID is wyse-5000.
Browser Homepage Select this option to change the browser homepage. Enter the
URL address of your choice to set the browser homepage.
Display Lock Screen Timeout From the drop-down menu, select the time-out value of the display
lock screen.
NOTE: This option is supported on thin clients running
ThinLinux 2.1 and later versions.
Configuring VDI global settings
The following VDI Global Settings can be configured under ThinLinux Policy Settings. In the VDI Global Settings you can set the Global
settings for Citrix and VMWare View.
Table 218. ICA COM Port Mapping
Option Description
Drive Mapping Use this option to map the COM ports to a COM drive.
NOTE: This option is applicable to thin clients running
ThinLinux 2.1 and later versions.
Table 219. Configuring Citrix general settings
Option Description
ICA Browsing Protocol Select this option to set the default browsing protocol.
ICA PAM Login Select this option to configure the PAM login.
Browser IP Enter the browser IP address.
Store Name Specify the store name.
Domain Name Enter the domain name.
PN Desktop Setup (Show All Applications) Select this option to enable the PN desktop setup. When this
option is enabled, all the published applications are displayed on the
desktop.
Enable Multimedia Redirection (MMR) Select this option to enable the Multimedia Redirection.
104 Managing groups and configurations