Install Guide
Table Of Contents
- Dell Wyse Management Suite Version 3.x Quick Start Guide
- Contents
- Introduction
- Getting started with Wyse Management Suite
- Installing Wyse Management Suite on private cloud
- Deploying applications to thin clients
- Upgrade Wyse Management Suite version 2.x to 3.x
- Upgrade Wyse Management Suite version 3.x to 3.2
- Upgrade Wyse Management Suite version 3.x to 3.3
- Uninstalling Wyse Management Suite
- Troubleshooting Wyse Management Suite
- Wyse Device Agent
- Additional resources
- Remote database
- Custom installation
- Access Wyse Management Suite file repository
- Create and configure DHCP option tags
- Create and configure DNS SRV records
- Creating and deploying standard application policy to thin clients
- Register Dell Hybrid Client manually
- Registering Windows Embedded Standard device manually
- Register ThinOS 8.x device manually
- Register ThinOS 9.x device manually
- Registering Linux device manually
- Terms and definitions
NOTE: Do not select TLSv1.1 and later if the WDA version in the Windows Embedded Device is lower than
14.4.0.153_Unified, and if you are using Merlin Imaging agent. The TLSv1.1 and later should not be selected if you are
using the import tool to migrate from Wyse Device Manager to Wyse Management Suite.
To use Wyse Management Suite repository, do the following:
1. Download the Wyse Management Suite repository from the public cloud console.
2. After the installation process, start the application.
3. On the Wyse Management Suite Repository page, enter the credentials to register the Wyse Management Suite repository
to Wyse Management Suite server.
4. If you enable the Register to Public WMS Management Portal option, you can register the repository to Wyse
Management Suite public cloud.
5. Click the Sync Files option to send the sync file command.
6. Click Check In and then click Send Command to send the device information command to the device.
7. Click the Unregister option to unregister the on-premises service.
8. Click Edit to edit the files.
9. From the drop-down list of Concurrent File Downloads option, select the number of files.
10. Enable or disable Wake on LAN option.
11. Enable or disable Fast File Upload and Download (HTTP) option.
● When HTTP is enabled, the file upload and download occurs over HTTP.
● When HTTP is not enabled, the file upload and download occurs over HTTPS.
12. Select the Certificate Validation check box to enable the CA validation for public cloud.
NOTE: When CA Validation from Wyse Management Suite server is enabled, the certificate should be present in the
client. All the operations such as, Apps and Data, Image Pull/Push is successful. If certificate is not present in the
client, the Wyse Management Suite server provides one generic audit event message Failed to Validate Certificate
Authority under Events page. All the operations such as, Apps and Data, Image Pull/Push is not successful. Also, when
CA Validation from Wyse Management Suite server is disabled, the communication from server and client happens in
secure channel without Certificate Signature validation.
13. Add a note in the provided box.
14. Click Save Settings .
48
Access Wyse Management Suite file repository