Administrator Guide

Change a group assignment on the Devices page
You can change the group assignment of a device using the Devices page.
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
3. Select the check box of the device.
4. From the More Actions drop-down menu, click Change Group.
The Change Group Assignment window is displayed.
5. From the drop-down menu, select a new group for the device.
6. Click Save.
Send messages to a device
You can send a message to a registered device using the Devices page.
Steps
1. Click Devices.
The Devices page is displayed.
2. Apply the filters to find the preferred device.
3. Select the check box of the device.
4. From the More Actions drop-down menu, click Send Message.
The Send Message window is displayed.
5. Enter the message.
6. Click Send.
Activate the device
You can send a command to activate a device if it is turned off or in the sleep mode.
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
3. Select the check box of the device.
4. From the More Actions drop-down menu, click Wake On LAN.
An Alert window is displayed.
5. Click Send Command.
View the device details
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
The preferred device list is displayed.
3. Click any of the displayed devices.
The Device Details page is displayed.
Managing devices
45