Administrator Guide
Conguring global session settings—ThinOS 8.5 and later versions
Use the Global session settings page to congure VDI global settings for a session.
Table 51. Conguring local resources settings
Option Description
Map Printers Select this option to automatically connect the local printers when
the session starts.
Map Serials Select this option to automatically connect the local serials when
the session starts.
Map SmartCards Select this option to redirect the smartcards to the remote session.
Map Sound Select this option to enable the local system sound when the
session starts.
Map Disks Select this option to enable map disks. You can automatically
connect the USB drives for ICA and RDP connections when the
session starts.
Disks Read Only Select this option to enable read-only disks.
Enable USB Redirection Select this option to redirect the USB drives to the remote session.
From the drop-down list, select your preferred option. If Exclude
some devices option is selected, you can exclude the following
devices from the session:
• Exclude disk devices
• Exclude audio devices
• Exclude printer devices
• Exclude video devices
Table 52. Conguring advanced settings
Option Description
Reconnect After Disconnect Select this option to reconnect the connection automatically after
the connection is disconnected.
Multi-Monitor Select this option to enable the multi-monitor support. The height
and width of the session desktop is similar to the local virtual
desktop size.
Turn Compression o Select this option to compress the le size and to reduce the time
required to download the les.
Optimize for low link speed Select the check box to optimize session settings for low link
speed.
Full Screen Mode Select this option to set the connection window in the full screen
mode.
Fast Disconnect Key Select this option to use the fast disconnect key.
NOTE: To disconnect from the sessions, press the F12
key.
40 Managing groups and congurations