Administrator Guide
Table 39. Conguring power management settings
Option Description
AC Recovery From the drop-down list, select an option to specify how the
system must behave when the AC power is restored.
Wake On LAN From the drop-down list, select an option to allow the thin client to
power up from the OFF state. You can trigger a thin client to power
up from the o state by using a LAN signal.
Wake On USB Select this option to to enable USB devices to wake the system
from OFF state or from the hibernate state.
Table 40. Reboot schedule
Option Description
Reboot Option Some BIOS settings require system reboot. When the reboot later
option is selected, devices restart when the current time matches
the set time. From the drop-down list, you can select any of the
following options:
• Reboot immediately
• Reboot later
• Do not reboot
Conguring rmware upgrade
Use this page to congure the thin client rmware upgrade settings, such as live upgrade, rmware update logic, local rmware check
preferences, and platform rmware mappings.
Table 41.
Conguring rmware upgrade
Option Description
Disable Live Upgrade This parameter automatically installs the new rmware on the thin
client based on the dened policies immediately after you restart
the thin client. To check for new rmware on each restart, disable
this option.
Firmware Update Logic This parameter determines how the thin client behaves when the
new rmware is published from the management console. From the
drop-down menu, select any one of the following options:
• Do not update—Thin client ignores the rmware versions
assigned to the management policies.
• New rmware only—Thin client updates the rmware only
when a newer version is assigned to the management policy.
• Any dierent rmware—Thin client updates the rmware to the
version assigned by the management policy—even if the
version is lower than the current image on device.
Skip Local Firmware Check Select this option to enable the thin client to bypass the local le
server checks for the rmware updates.
NOTE: Dell recommends that you enable this option if you
dene a rmware on the management console. It leads to
an endless restart as the thin client applies diering
images, if you have rmware policies in the management
console and rmware on a local le server.
34 Managing groups and congurations