Administrator Guide

• For a private cloud, register a thin client by providing the Wyse Management Suite URL, and the group token (Optional for the group to
which you want to register this device. Devices are registered to the unmanaged group, if the group token is not provided.
Registering ThinOS thin clients through WDA User Interface
Creating a group is a pre-requisite for registering the thin client to the Wyse Management Suite.
1 From the desktop menu, click System Setup, and then click Central Conguration.
For example, click the System Settings icon on the Zero Toolbar, and then click Central Conguration. For more information about
ThinOS, refer to the ThinOS documentation.
2 Enter a valid group token and the server URLs.
3 Click OK, and follow the instructions displayed on the screen.
4 Enter the corporate credentials when prompted.
NOTE: To verify whether your entry is correct, use the validate key. If a success message is displayed, click OK to restart
the device, and complete the registration process. If a failure message is displayed, double-check the group registration key
which you have entered, and verify whether you have a proper network connectivity.
5 To verify the network connectivity for the real-time commands, go to the Devices page. Click the Name link to open the Device
Details page for your thin client, and then click Restart.
The thin client basic connectivity is complete, and the thin client is successfully registered. You can send a real-time command to the
thin client, and congure the policies at the group level.
Conguring the Wyse Device Agent settings
Use this tab to congure the Wyse Device Manager and Wyse Management Suite settings.
ThinOS supports all the Wyse Management Suite Group Policy settings. To congure the Wyse Management Suite settings, do the
following:
1 From the desktop menu, click System Setup, and then click Central Conguration.
The Central Conguration dialog box is displayed.
2 Click WDA > WMS, and use the following guidelines:
Managing devices
119