Install Guide
Registering ThinOS device manually
To register the ThinOS devices manually, do the following:
1 From the desktop menu, go to System Setup > Central Conguration.
The Central Conguration window is displayed.
2 Click the WDA tab.
WMS is selected by default.
NOTE: WDA service automatically runs after the client boot up process is complete.
Figure 16. Central Conguration
3 Select the Enable Wyse Management Suite check box to enable Wyse Management Suite.
4 Enter the Group Registration Key as congured by your administrator for the desired group.
5 Select the Enable WMS Advanced Settings option, and enter the WMS server or MQTT server details.
6 Enable or disable CA validation based on your license type—public cloud or private cloud.
• Public cloud—Select the Enable CA Validation check box if the device is registered with Wyse Management Suite in public cloud.
• Private cloud—Select the Enable CA Validation check box if you have imported certicates from a well-known certicate
authority into your Wyse Management Suite server.
NOTE
:
For the pro cloud version of Wyse Management Suite in USA, do not change the default WMS server and MQTT server details.
For the pro cloud version of Wyse Management Suite in Europe, use the following:
• CCM Server—eu1.wysemanagementsuite.com
• MQTT Server—eu1-pns.wysemanagementsuite.com:1883
7 To verify the setup, click Validate Key. The device automatically restarts after the key is validated.
NOTE
: If the key is not validated, verify the credentials which you have provided. Ensure that ports 443 and 1883 are not
blocked by the network.
8 Click OK.
The device is registered to the Wyse Management Suite console.
Installing Wyse Management Suite on private cloud
19