Administrator Guide

5. To configure the business hours and business days for the device group, click Add Row in the Business Hour field and the
days from the Business days drop-down menu.
6. To enable the agent to report user sessions, enable the Enable Session Reporting option and select the timing from the
Report Session drop-down menu. The available options are:
● Send user session at run time—The Dell Client Agent sends the user session report every time a user logs off from
the device.
● Send user session at check-in time—The Dell Client Agent sends the user session report every 8 hours.
● Send user session outside of business hours—The Dell Client Agent sends the user session report outside of
business hours which is configured in step 5.
7. To deploy the configurations to any device based on the user level configurations, enable the Enable User Personalization
Roaming option. If this option is enabled, the settings that are configured by a user on a device is saved in the Wyse
Management Suite server and the configurations are applied automatically when a user logs in to a different device. The
configured settings take precedence over all other configurations.
8. To enable notifications on the device, enable the Enabling Push Notification option. If this option is enabled, the settings
that are configured are applied immediately after you click Save & Publish. If you disable this option, the configurations are
applied when the device sends heartbeat signal.
NOTE: If you disable the option, the application deployment may enter the error state since Wyse Management Suite
does not send the push notification to Dell Hybrid Clients.
9. To apply the configuration outside of the specified business hours, select the option from the drop-down menu. The available
options are:
● Immediately—If you select this option, the configurations are applied immediately after you click Save & Publish.
● Outside of specified business hour—If you select this option, the configurations are applied outside of business hours
which is configured in step 5.
● When no user has logged on to the device for a period of time—If you select this option, the configuration are
applied when no user has logged in to the device for defined time. You can specify the idle time after which the
configurations are applied to the device.
NOTE:
You can also configure these settings for a particular device from the Devices page. For more information, see
Configure a device level policy.
Managing groups and configurations 43