Administrator Guide

5. Enable or disable CA validation based on your license type. For public cloud, select the Enable CA Validation check box. For
private cloud, select the Enable CA Validation check box if you have imported certificates from a well-known certificate
authority into your Wyse Management Suite server.
To enable the CA validation option in the private cloud, you must install the same self-signed certificate on the ThinOS
device as well. If you have not installed the self-signed certificate in the ThinOS device, do not select the Enable CA
Validation check box. You can install the certificate to the device by using Wyse Management Suite after registration, and
then enable the CA validation option.
6. To verify the setup, click Validate Key.
NOTE: If the key is not validated, verify the group key and WMS server URL which you have provided. Ensure that
ports mentioned are not blocked by the network. The default ports are 443 and 1883.
7. Click OK.
NOTE: When the Enrollment Validation option is enabled, the manual or auto-discovered devices are in Enrollment
Validation Pending state in the Devices page. The tenant can select a single device or multiple devices in the Devices
page and validate the enrollment. The devices are moved to the intended group after they are validated. For more
information about how to validate the devices, see Enrollment validation.
The device is registered to Wyse Management Suite.
8. Log in to Wyse Management Suite.
9. Add the device to your desired group (optional)—see Managing groups and configs.
10. Configure the thin client using any of the following options:
● Using the Groups and Configs page—see Edit the ThinOS policy settings.
● Using the Devices page—see Managing Devices.
Register and configure a new ThinOS 9.x device using
Wyse Management Suite
Steps
1. From the desktop menu of the thin client, go to System Setup > Central Configuration.
The Central Configuration window is displayed.
2. Enter the Group Registration Key as configured by your administrator for the wanted group.
3. Select the Enable WMS Advanced Settings check box.
4. In the WMS server field, enter the Wyse Management Server URL.
5. Enable or disable CA validation based on your license type. For public cloud, select the Enable CA Validation check box, and
for private cloud, select the Enable CA Validation check box if you have imported certificates from a well-known certificate
authority into your Wyse Management Suite server.
To enable the CA validation option in the private cloud, you must install the same self-signed certificate on the ThinOS
device as well. If you have not installed the self-signed certificate in the ThinOS device, do not select the Enable CA
Validation check box. You can install the certificate to the device by using Wyse Management Suite after registration, and
then enable the CA validation option.
6. To verify the setup, click Validate Key.
NOTE:
If the key is not validated, verify the group key and WMS server URL which you have provided. Ensure that
ports mentioned are not blocked by the network. The default ports are 443 and 1883.
An alert window is displayed.
7. Click OK.
8. Click OK in the Central Configuration window.
NOTE:
You can also register the devices using any of the following methods:
● Using DHCP option tags—see Register devices by using DHCP option tags.
● Using DNS SRV record—see Registering devices by using DNS SRV record.
Registering and configuring a new device using Wyse Management Suite 21