Administrator Guide
Table 9. Firmware images
Platform ThinOS firmware image
Wyse 3040 Thin Client A10Q_wnos
Wyse 5070 Thin Client—Celeron processor X10_wnos
Wyse 5070 Thin Client—Pentium processor X10_wnos
Wyse 5070 Extended Thin Client—Pentium processor X10_wnos
Wyse 5470 Thin Client X10_wnos
Wyse 5470 All-in-One Thin Client X10_wnos
Add ThinOS firmware to the repository
Steps
1. Log in to Wyse Management Suite using your tenant credentials.
2. In the Apps & Data tab, under OS Image Repository, click ThinOS.
3. Click Add Firmware file.
The Add File screen is displayed.
4. To select a file, click Browse and go to the location where your file is located.
5. Enter the description for your file.
6. Select the check box if you want to override an existing file.
7. Click Upload.
NOTE:
● The uploaded firmware can be used only to upgrade ThinOS 8.6 to ThinOS 9.0.
● The file is added to the repository when you select the check box but it is not assigned to any of the groups or
devices. To deploy firmware to a device or a group of devices, go to the respective device or group configuration
page.
Upgrade ThinOS 8.6 to ThinOS 9.x
Prerequisites
● The ThinOS conversion image must be added to the ThinOS firmware repository. For more information, see Add ThinOS
firmware to repository.
● Create a group in Wyse Management Suite with a group token. Use this group token to register the ThinOS 8.6 devices.
● The thin client must be registered to Wyse Management Suite.
● Do not configure any wallpaper settings on Wyse Management Suite.
Steps
1. Go to the Groups & Configs page, and select a group.
2. From the Edit Policies drop-down menu, click ThinOS.
The Select ThinOS Configuration Mode window is displayed.
3. Select Advanced Configuration Mode.
4. Go to Firmware Upgrade, and click Configure this item.
5. Clear the Disable Live Upgrade and Verify Signature options.
6. From the Platform Type drop-down list, select the platform.
7. From the Firmware to auto-deploy drop-down list, select the firmware added to the repository.
8. Click Save & Publish.
The firmware is deployed to the thin client. The conversion process takes 15-20 s, and the thin client restarts automatically.
Firmware upgrade
109