Specifications

44 Chapter 4
RDP
Use the Remote Desktop Protocol (RDP) Configuration dialog box (click RDP) to set
RDP connection configurations. After configuring, be sure to click OK.
Network
Use the Network tab to configure the network settings:
• Description - Enter a name/label for the connection.
• Server - Enter a server name or IP address.
• Ping Before Connect - Pings the connection to see if it is reachable before the
connection is attempted.
• Notify When Disconnected - Notifies you when the connection is broken.
Connection
Use the Connection tab to configure the connection settings:
• Compression - Enables compression.
• NT4 compatible - Enables RDP protocol version 4.
• Low bandwidth - Enables low-bandwidth optimization.
• Sound - Select audio source for the connection (Local or Remote).
• Encryption Level - Select an encryption level (Normal or None).
Tip
For servers with data encryption settings, you must select Normal for the
encryption level.