Specifications

Configuring Connections 41
ICA
Use the Citrix ICA Client Settings dialog box (click ICA) to set ICA connection
configurations. After configuring, be sure to click OK.
Tip
When using multiple ICA connections, you can use the ICA Connection
Center to manage open ICA connections. For information on using multiple
ICA connections, refer to the Wyse Knowledge Base on the Wyse Web site.
Network
Use the Network tab to configure the network settings:
• Server or Published Application - Select an option for making the connection.
• Description - Enter a name/label for the connection.
• Network Protocol - Select a network protocol.
• Browser Server - Enter the Browser Server name (this can be a list of server names
with each name separated by a semi-colon).
Tip
You do not need to enter a browser server name if you do not want to
connect to either a published application or a server by name. In addition,
generating an ICA connection to a server using a server name in the Server
text box for the connection does not require a Browser Server address, as
long as the DNS information is properly entered.
• Server or Application Name - Select a server from the Server list or a published
application from the Application Name list. If needed, click Refresh to refresh the list of
servers or published applications.
Tip
You can enter only the IP address of the target server as long as there is no
need to resolve a name.