Specifications

Configuring System Settings 37
VNC Server
Use the VNC Server Settings dialog box (click VNC Server) to enable and disable the
VNC server, and to use and change the server password.
Tip
The VNC server is enabled by default.
WDM
Use the WDM Agent Configuration dialog box (click WDM) to configure the Wyse Device
Manager server location.
Tip
It is recommended that after configuring, you reboot the thin client.
To configure the WDM server location:
1. Enter the WDM Server IP address.
2. Enter the Client to Sever Port (default, is 80).
3. Enter the Secure Port (HTTPS port default is 443).
4. Click OK.
Tip
Note that you can also configure the Wyse Device Manager server location
through INI files (wlx.ini) or the DHCP Option tag 186 (see
"Central
Configuration: Automating Configurations").