Deployment Guide

Dell Wyse Device Manager 5.7.1 Maintenance and Upgrade Release Notes Page 13 of 13
To install the hotfix, do the following:
1) Extract the installer file in a suitable folder location.
2) Run the Setup.exe file from the folder.
3) After the installation is completed, confirm the installation by launching the WDM
console by right-clicking on the WyseDeviceManager node under Console Root,
and selecting About Dell Wyse Device Manager option.
Note: You cannot run the 5.7.1 Installer from a Network Shared folder.
© 2016 Dell Inc.
This manual and the software and firmware described in it are copyrighted. You may not reproduce, transmit, transcribe, store in
a retrieval system, or translate into any language or computer language, in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual or otherwise, any part of this publication without express written permission.