Administrator Guide

4 After you congure the device to be PAD capable, the PAD Capable ag is set to Green as shown below:

Figure 45. PAD Capable

Making a Windows Device Repository Capable

To make a Windows device Repository capable:

1 Deploy PADService_SysprepScript_WES7 on the WES7 device.

2 Deploy PADService_SysprepScript_WE8S on the WE8S device.

3 Deploy PADService_SysprepScript_WIE10 on the WIE10 device.

To conrm whether the device is Repository capable or not:

1 In the Device page, select any device.

2 Click the View details tab view the details of the selected device.

3 In the view details page, check the Capabilities section.

If the device is not PAD capable, the Repository PAD ag is set to Red as displayed below:

Figure 46. Repository capable

4 After you congure the device to be Repository Capable, the Repository Capable ag is set to Green as displayed below:

System