Administrator Guide

• DNS Hostname: Select if you want to allow devices to use DNS Hostname lookup method to discover WDM Server.
• DNS SRV record lookup : Select if you want to allow devices to use DNS SRV record lookup method to discover WDM Server.
• DHCP optipon tags : Select if you want to allow devices to use DHCP option tags to discover WDM Server.
• Manual discovery from Device Manager: Select if you want to discover the device uing IP Range or Subnet discovery methods in the
Find Device window.
• Device autodiscover management server after: Select the number of missed check-ins to enable auto-discovery options. The device
enables the auto-discovery method, if the number of missed check-ins crosses the specied value.
• Device discovery timeout: Enter the maximum time allotment for WDM to discover all the devices on your network.
• DHCP discovery: Enables the discovery of devices in the local subnet of the management server.
About Services
The Services page helps you to view the TFTP Server and the Wake on Lan details.
Figure 41. Services
• TFTP Server: Enable this option to allow WDM to use Trivial File Transfer Protocol (TFTP) when updating the device.
• TFTP Mount Point: Displays the TFTP mount point that WDM set during installation. Typically, this is the TFTP root directory
(WDM) below the FTP home directory used by the Master Repository.
• TFTP time Out: Specify the time interval (in seconds) that device waits for a connection to the TFTP service before attempting to
reconnect.
• TFTP retries: Specify the number of times that device will attempt to connect to the TFTP service before failing.
• Wake On Lan: Allows you to wake up devices that are in sleep mode or are shut down.
• Set the Wake On Lan tries. The number of times that the service attempts to perform a WOL command before stopping and the
Delay between WOL Retries (Secs) . The length of time WDM pauses before it attempts another WOL command to the same
device.
System
59