Administrator Guide

Console

Click the Console in the System list to view the device status.

Figure 38. Console

1 Enter the following details:

• Device Health Status:

• Perform a partial check-in every - Set the partial check-in frequency for all devices by selecting a number and a time unit

(minutes, hours, days). The default is 1 Hour. Partial check-ins occur regularly at the specied interval to ascertain device

health status (red, yellow, green). Partial check-ins require less network bandwidth than a full check-in. This becomes

important if your WDM installation contains thousands of devices. Changes to check-in frequencies will not take eect until

previously set check-in time or the device is refreshed.

• Medium Device Status - Select the number of missed check-ins to set the medium device status.

• High Device Status - Select the number of missed check-ins to set the high device status.

• Custom Group Folders - Select this option if you want to view empty folders in the Device Manager when you create user-

dened groups for your Device Views.

• Remote Sessions- This option is applicable to Windows, Linux, and Thin OS (WTOS) devices, where you have congured remote

sessions . If you select this option, then the details of the remote sessions for that device are listed in the Remote Sessions tab of

the WDM Console. This data is useful in charging the end users for the remote sessions.

For Windows and Linux devices, click on + Add server button to add VMWare Remote Session Server and Citrix Remote Session

Servers.

You can also specify the number of days to delete older data. The default is 45 days.

System