Administrator Guide
Figure 35. Registering Remote Repositories
You must congure the following points before you register remote repositories:
• WDMVXC-M always names the rst Repository Master. Any additional Remote Repositories that you install can be named anything
other than Master.
• If you do not install multiple Remote Repositories, then WDMVXC-M uses the Master Repository for all subnets.
• If you deployed WDMVXC-M components separately, then it is recommended that you install the Master Repository on a machine on
the same subnet as where you installed the other WDMVXC-M components.
Before you register, make sure that you have successfully installed the following:
• WDM Enterprise EditionVXC-M on your network.
• Any Remote Repositories, so that you can connect to them.
To register a Remote Repository:
1 In the WDMVXC-M Console, expand System.
2 Click the Repositories option. To congure a new repository click the Add Repository option and complete the congurations using
the following guidelines:
• Repository Information area:
• Name - Provide the name to identify the Software Repository.
• Host Name/ IP address - Provide the Host Name or IP address of the server where you want to congure the repository.
• Relative Path - Provides the root path of WDM software repository.
• Assign Subnets - Allows you to assign a subnet to a repository.
• FTP area:
52
System