Administrator Guide

3 In the capabilities section, look for WCM support.
4 The device is prole manager capable if it is in the following condition:
• Green color: The device is prole manager capable.
• Red color: The device is not prole manager capable.
5 To make the device prole manager capable, deploy the latest WDA agent available in WDM.
NOTE:
For HAgent supported devices, register the WCM client package and push to the devices having HAgent.
When these devices check-in to the WDM server, the Hserver service recognizes these devices based on the value they send in the
WCMSUPP tag.
NOTE: The WDM Web UI supports only JSON based conguration and it can be deployed to the devices having WDA agent and
the XML based conguration cannot be created from WEB UI.
Deploying a Conguration Package Using Prole
Manager
To create a conguration package using Prole Manager:
1 On the WDM Web UI, click Updates > Proles.
The Proles page is displayed.
2 From the Select Operating System drop-down list, select your preferred operating system.
The drop-down box displays only those operating systems for which you have not created conguration packages. You can create only
one prole per operating system. The leaf conguration takes precedence over parent but WTOS is an exception.
3 From the drop-down list, select the preferred View on which the particular prole needs to be deployed.
4 Click Add to include the new prole to the groups.
5 Select a WCM conguration from the Assigned drop-down list.
This list displays all the conguration packages that you have created for the selected operating system using the WCM application.
6 Click Save.
Whenever there is any change in conguration from the existing conguration on the client, PM applies the updated conguration
whenever the client checks in. The Update Now window is displayed on the client, and when you click OK PM applies the updated
conguration.
Deleting a PM Conguration Package
To delete a conguration package:
1 On the WDMVXC-M Web UI, click Updates > Proles.
The existing proles are listed on the page.
2 Select any prole, and click the Delete icon.
You will be prompted to proceed with the delete operation or cancel it.
3 Click Delete to delete the conguration package.
NOTE
: You can only create one prole for a particular operating system at any given point. If you want to create another prole
for the same operating system, you must delete the existing package and create a fresh one.
44 Updates