Administrator Guide
Figure 29. DDC
To add a new DDC, complete the following task:
1 From the Select Operating System drop-down list, select your preferred operating system.
2 From the Select Media Size drop-down list, select your preferred media size.
3 From the drop-down list, select the preferred view to be deployed for a particular prole.
4 Click the On/O option to enable or disable the Enforce Sequence option. Depending on whether or not you want the packages that
are a part of the DDC to be the only packages allowed for the devices (that is no other packages can be sent to the devices), select
or clear Enforce Sequence.
NOTE
: Selecting Enforce Sequence may interfere with any packages that are sent or scheduled to a device outside the
DDC process.
5 Click Add to include the new DDC to the groups.
6 Select an Image from the Image drop-down list.
Figure 30.
7 Select a software package from the packages drop-down list.
8 Specify Execute DDC either Device Checks in or Every Day at Specic Time.
9 Click Save.
Identifying Prole Manager Supported Devices
1 In the Device page, select a device.
2 Click the view details option and check the capabilities section.
Updates
43