Administrator Guide
6 Log in to the system where the WDM console is running, and right click on a schedule from Update Manager > Schedule Packages.
7 Select the Roll to Boot option.
8 For WES7 devices, press the P key, and boot the device through the PXE LAN mode. For WE8S and WIE10 devices, press the P key,
and boot the device through Merlin Non-PXE mode.
9 After the image is pulled, deploy the pulled image using the Deploy via Peers in Subnet option.
Conguring PAD
For the PAD feature to function, you need to congure the Subnet preferences. You can specify the number of devices that you want to
serve as repositories and also specify the connection details to the master device.
Figure 57. Peer Assisted Deployment
To congure PAD on WDM:
1 On the WDM Console, select System → Peer Assisted Deployment.
2 Specify the minimum number of required peer capable repositories as One or Two.
3 Change the maximum number of simultaneous connections to the master device if required. The default number of simultaneous
connections is 7.
4 Change the maximum number of retry count to the master device if required. The default number of simultaneous connections is 3.
5 Enter the credentials for accessing the repositories. Specify the User Name, Password, and the relative path for the following device.
• SUSE Linux (SCP)
• ThinLinux
• Windows Embedded Standard 7
• Windows Embedded Standard 8
System
83