Administrator Guide

The software repository denition is added to the database to dene a repository on a server at 10.10.11.9. The default path for the root

directory of the FTP service is /rapport. This repository is accessed with the username of the user. The FTP is used as the transfer

protocol and is displayed in WDM as remote.

Format for importing default groups for subnets from at les

The format to provide data in a at le for default groups for subnets is as follows:

Broadcast Address, Default group, Default group value

• Broadcast Address of the device. For example, 10.10.10.255

• Default Group. For example, State

• Default Group Value. For example, California

Example 1: 10.150.115.255;States;California

Example 2: 10.150.115.255;Department;Sales

Example 3: 10.150.116.255;States;California

NOTE: The WDM database must contain the subnet, groups and group values.

A check box labeled Update Existing Default Groups for Subnets appears at the bottom of the page when Default Groups for Subnets is

selected.

If the box is unchecked, the import for any group name value fails if the subnet already contains the assigned default group.

If the box is checked, the group value is updated with the import le group name value.

High Availability Conguration Utility

The High Availability Conguration Utility is used when you are setting up a High Availability environment and are clustering the database.

This utility helps WDM to connect to the cluster in order to function within the cluster and ensure that there is zero downtime. This utility is

available after you install WDM.

1 Enter the following details:

• Database Name – This is displayed by default and cannot be edited.

• Database Server – Specify the hostname of the database cluster.

• Database Port— Specify the port number.

• Database User Name – Specify the database user.

• Database Password – Specify the password of the database user.

2 Click Provision.

The connection details are displayed on the right side of the utility.

NOTE

: You should re- enter the licence as provisioning alters the license. Do not execute HA utility in non HA environment.

Account Utility

The Account utility enables you to view the details of the WDM database and also create new credentials to access the database.

1 The account utility displays the following information:

• Server Port — The IP address of the WDM database server and the database server port number.

Dashboard