Install Guide

5 Now the installation of certicate in WDM server is done.
6 After the installation of certicate, browse through Server ->Web Sites->Rapport HTTP Server and click Bindings... on right most
pane to open Site Bindings window.
7 In Site Bindings window, click Add to Add Site Binding
8 In Add Site Binding, select the recently created certicate from SSL Certicate combo box and click OK button.
9 In order to start only HTTPS communication, select SSL Settings under Server->Web Sites->Rapport HTTP Server.
10 In SSL Settings, select Require SSL check box and Apply the setting.
Installing Root Certicate Authority in IIS 7 on Windows Server 2012 R2
Use the following guidelines:
• In order to install the certicate, two steps need to be followed:
– Install the certicate on Domain Controller server
– Install the certicate on WDM server
Install the certicate on Domain Controller server:
Use the following guidelines:
1 Go to the Server Manager.
2 In the Dashboard >> select option 2 Add Roles and features.
3 In Add Roles and Features wizard, select Installation Type as >> Role-based or feature-based installation.
4 In Server Selection >> Select a server from the server pool (By default local server will be selected).
5 Then in Server Role window, select Active Directory Certicate Services’ Role.
6 Selecting Active Directory Certicate Services Role will launch the Add Role and Features Wizard’ will auto launch with sub-
features>> Click on Add Features button.
7 Click Next->Next. Then in Features window, leave the default values as it is and click Next.
8 Then in AD CS window appears and click Next button.
9 In Role Service window, select the options Certication Authority and Certicate Authority Web Enrolment.
10 After selecting the option Certicate Authority Web Enrolment, if IIS is not installed in the server, another window Add Features that
are required for Certication Authority Web Enrollment sub-window will appear.
11 On the above window, click on Add Feature button and click Next to Conrmation window.
12 Then click on ‘Install’ button to install the AD Certicate role.
13 In the Results window, Feature installation progress can be viewed.
14 After Installation succeeds for AD Certicate Authority role, click on ‘Close’ button.
15 Then in the Server Manager>> Dashboard console under notications’ nd the Post-deployment Conguration message.
16 In Post-deployment Conguration message click on link “Congure Active Directory Certicate Services on the local server”.
17 Then AD CS Conguration>> Credentials window will open get launched; provide the required appropriate credentials and click on
‘Next’ button.
18 Then under Role Services>> select the options Certication Authority and Certicate Authority Web Enrolment and click ‘Next’
button.
19 Then in the Setup Type window, depending on the requirement select either Enterprise or Standalone radio button and click Next to
open CA Type window.
20 In CA Type window, depending on the requirement select either Root CA or Subordinate CA radio button and click Next to open
Private Key window.
21 In Private Key window, depending on the requirement select either Create a new private key or Use existing private key radio button
and click Next to open Congure Cryptography for CA window.
22 In Congure Cryptography for CA window,
• depending on the requirement select the value for eld Select a cryptographic service provider (CSP) from the combo drop down
box,
• Provide the Key length from the next combo box
• Select the value for eld Select the Hash algorithm for signing certicate issued by this CA
Installing Wyse Device Manager
59