Install Guide

Figure 7. Congure Software Repository Server screen
10 On the Congure Software Repository Server screen, you can choose one of the following options:
• CONFIGURE NEW REPOSITORY SERVER—Select this option if you want the installer to congure a new repository server. To
congure a new repository server:
– Select the protocol and settings to distribute software to the managed devices. HTTPS is selected by default. You can also
select FTP for ThreadX 4.x and CIFS for ThreadX 5.x.
– Select the authentication type. Windows is selected by default.
NOTE
: Basic authentication is required for Linux.
– Create new user credentials or use an existing user credentials.
• USE EXISTING REPOSITORY SERVER—Select this option if you want the installer use an existing repository server. To
congure the existing repository server:
– Select the protocol and settings to distribute software to the managed devices. HTTPS is selected by default. You can also
select FTP for ThreadX 4.x and CIFS for ThreadX 5.x.
– Select the authentication type. Windows is selected by default.
– Enter the server credentials. The server IP address option is grayed out and the default username is rapport.
11 Click NEXT.
12 Select the services you want to install, and click NEXT.
Installing Wyse Device Manager
23