Administrator Guide
Figure 83. tcmc2 Properties
10 The fourth and nal record is a reverse PTR record for the management host.
Figure 84. PTR Record
11 The zone must match the subnet that the host is in, and the record is the IP address assigned to the management console.
12 Once the DNS_SRV conguration is done, refer to Upgrading Teradici rmware from 4.x to 5.x using WDM for upgrading the
rmware.
Upgrading the ThreadX 4.x devices to ThreadX 5.x
from WDM
This section denes the steps to follow while upgrading the existing ThreadX 4.x devices to ThreadX 5.x devices from WDM. This helps you
to continue the management of ThreadX 5.x devices from WDM after upgrading, using the new ThreadX management solution.
The following are the pre requisites to upgrade the ThreadX 4.x devices to ThreadX 5.x from WDM:
• ThreadX 5.x latest released rmware in the form of .rsp package should be available to upgrade.
• The FQDN of the WDM server should be available for DHCP or DNS congurations.
• Cert.pem which is available in the following path WDM Installed directory > Wyse > WDM > Teradici. This is not required, if the
thumbprint is added to DHCP option tag or through DNS_SRV record as mentioned in previous chapters.
Management of Teradici device using WDM
99