Administrator Guide
Figure 48. Console
1 Enter the following details:
• Device Health Status:
– Perform a partial check-in every - Set the partial check-in frequency for all devices by selecting a number and a time unit
(minutes, hours, days). The default is 1 Hour. Partial check-ins occur regularly at the specied interval to ascertain device
health status (red, yellow, green). Partial check-ins require less network bandwidth than a full check-in. This becomes
important if your WDM installation contains thousands of devices. Changes to check-in frequencies will not take eect until
previously set check-in time or the device is refreshed.
– Medium Device Status - Select the number of missed check-ins to set the medium device status.
– High Device Status - Select the number of missed check-ins to set the high device status.
System
69