Administrator Guide
e Click View Details to view complete overview, Status, Network, Hardware and Logs of the selected device.
• Overview — Provides a complete overview of the System, Location, Capabilities, Network, and Drives of the selected
device.
• Status— Displays the following:
– Apps that are installed and running on the system.
– Processor and system performance.
– Remote session for the selected devices.
– Connected USB devices for ThinOS devices.
• Network— Provides the NIC card details and the Network Details of the selected device.
• Hardware— Provides the details of the following attributes:
– Disks: Displays the number of partitions available on the device and its memory size.
– Drives: Displays the number of drives and its memory size.
– Systems: Displays the hardware related details and connected monitors for ThinOS devices.
• Logs— Provides the details of the Audit Trails and Deployed Packages of the selected device.
f Click Add/Modify Filter to lter devices page depending on Name, IP Address, Operating System, Platform, Last Check-in and
MAC Address. Use the following guidelines:
Figure 7. Add/Modify Filter
1 To lter devices page depending on the device name, enter Device name in the Name eld, and then click Update.
NOTE
: Use Partial Name of the device, if you are searching a device by part of the names.
2 To lter devices page depending on the IP address, enter the IP address of the device in the IP Address eld, and then
click Update.
3 From the drop-down lists, select your preferred Operating System and the device Platform to lter the devices page
depending on the operating system and platform.
4 From the Last Check-in drop-down list, select either After or Between based on your preference and specify the date and
time in MM/DD/YYYY hh:mm format during which the device was checked-in.
5 Enter the MAC address of the device, and click Update to lter the devices page depending on the MAC address of the
device.
6 Enter Number of Devices to be displayed in a page.
7 Click Reset to reset the entered value.
8 Click Update to add a lter to the devices page
9 Pause the mouse pointer on the ltered attribute, and then click the x icon displayed next to the lter to remove the applied
lter.
Select the preferred device to perform the following real time commands:
a To push a package to specic device, click Update.
b To restart the selected device, click Reboot Device.
c To shutdown or stop the selected device, click Shutdown.
d To send a message for the selected device, click Send Message. The Send Message screen is displayed.
1 Select the radio button of the preferred message type from the displayed message type options. The following are the
message types:
Devices
25