Administrator Guide
The software repository denition is added to the database to dene a repository on a server at 10.10.11.9. The default path for the root
directory of the FTP service is /rapport. This repository is accessed with the username of the user. The FTP is used as the transfer
protocol and is displayed in WDM as remote.
Format for importing default groups for subnets from at les
The format to provide data in a at le for default groups for subnets is as follows:
Broadcast Address, Default group, Default group value
• Broadcast Address of the device. For example, 10.10.10.255
• Default Group. For example, State
• Default Group Value. For example, California
Example 1: 10.150.115.255;States;California
Example 2: 10.150.115.255;Department;Sales
Example 3: 10.150.116.255;States;California
NOTE: The WDM database must contain the subnet, groups and group values.
A check box labeled Update Existing Default Groups for Subnets appears at the bottom of the page when Default Groups for Subnets is
selected.
If the box is unchecked, the import for any group name value fails if the subnet already contains the assigned default group.
If the box is checked, the group value is updated with the import le group name value.
High Availability Conguration Utility
The High Availability Conguration Utility is used when you are setting up a High Availability environment and are clustering the database.
This utility helps WDM to connect to the cluster in order to function within the cluster and ensure that there is zero downtime. This utility is
available after you install WDM.
1 Enter the following details:
• Database Name – This is displayed by default and cannot be edited.
• Database Server – Specify the hostname of the database cluster.
• Database Port— Specify the port number.
• Database User Name – Specify the database user.
• Database Password – Specify the password of the database user.
2 Click Provision.
The connection details are displayed on the right side of the utility.
NOTE
: You should re- enter the licence as provisioning alters the license. Do not execute HA utility in non HA environment.
Account Utility
The Account utility enables you to view the details of the WDM database and also create new credentials to access the database.
1 The account utility displays the following information:
• Server Port — The IP address of the WDM database server and the database server port number.
Dashboard
21