Administrator Guide

Figure 100. Management Screen
In the Internal EM URI eld, provide the uri of the EMSDK server as wss://<IP Address of ThreadX 5.X installed machine and click
Apply button.
4 Click Continue button to continue the process..
Figure 101. console connected to the EMSDK server Screen
NOTE
: Devices are not discovered in the WDM, if clients are connected before the ThreadXApi service is started. So if you
can not view devices getting discovered after the clients are in connected state to the EMSDK. you have to see the
ThreadXApi service is running byviewing into its log le located at C:\inetpub\wwwroot\ThreadXApiwith lename
ThreadXApi.txt
After completing the process of checking into WDM server successfully, you can view the discovered devices in the WDM UI. You
should execute the Reboot, and Shutdown real-time commands after it is visible in the Web UI.
Troubleshooting
121