Administrator Guide

Figure 97. Advanced Settings
7 Right click the ASP.NET v4.0 application pool and click Start.
Manually conguring the ThreadX 5.X
devices using teradici client management
console when automatic way does not work
Pre-requisite: Make sure that EMSDK and ThreadXApi are installed and running successfully on the device.
1 On the management console of ThreadX device, select Upload Menu > Certicate, and browse for the certicate cert.pem installed
at <Wyse install folder>\WDM\TeraDici\cert.pem where WDM is installed. After selecting the le, click Upload button.
NOTE
: Uploading the cert.pem certicate is important for the client to establish the connectivity with the EMSDK server,
as the EMSDK server validates the certicate data from the client when it attempts to connect to the server. Any
mismatch in the certicate data, the server rejects the connection request from the device.
Troubleshooting 119