Administrator Guide

Figure 85. RSP package folder
4 Rename the folder name as number value in the .rsp le.
5 Place the .rsp le outside the folder.
NOTE: The le name of .rsp le, package folder name, and number value must be
same.
Figure 86. RSP package folder
After deploying the created RSP package through WDM as described in the Deploying Teradici image version 5.x from 4.x rmware using
DDC in WDM and Deploying Teradici image version 5.x using selected devices in WDM, the client checks in to WDM as a 5.x device after
the successful rmware upgrade to 5.x, and WDM recognizes them as ThreadX 5.x devices. Future 5.x rmware update RSP requires the
new OS type TDC5 (OS=TDC5).
NOTE
: All management features of ThreadX 5.x devices (devices having WDM compatible 5.x rmware) including the
deployment of RSP packages with TDC5 as operating system type (OS Type) can be deployed through WDM web UI only and is
not supported using desktop version of WDM.
Prerequisite on WDM repository for deployment of rmware and OSD logo
using WDM web UI for ThreadX 5.x devices
Deployment of rmware package with OS Type TDC5 and package containing OSD (On Screen Display) logo for ThreadX 5.x devices, it is
mandatory to have CIFS protocol enabled to upload the les from WDM repository.
Make sure the Software repository test connection for CIFS is successful. To test CIFS connection, do the following:
1 Open the WDM web UI, and log in as administrator.
2 Go to System > Repositories.
3 In the CIFS section, click the Check Connection link.
Management of Teradici device using WDM
101