Administrator Guide

f Click Login.
The VMware Horizon Client connects to the selected desktop. After connection is established, the list of published desktops is
displayed.
g Right-click the particular application or the desktop icon, and then click Launch to connect to that application or desktop.
For more information on VMware Horizon Client, see www.vmware.com.
NOTE:
Certicate checking mode—Certicate checking mode determines how the client proceeds when the client cannot verify
that your connection to the server is secure. Dell recommends that you do not change this setting unless instructed by your
system administrator.
To access the certicate checking mode, click the icon on the upper-right corner of the window, and then click Congure
SSL from the drop-down list. In the VMware Horizon Client SSL conguration dialog box, select from any of the following
options based on your requirements:
• Never connect to untrusted servers
• Warn before connecting to untrusted servers
• Do not verify server identify certicates
Conguring Citrix receiver session services
Citrix Receiver is a server-based computing technology that separates the logic of an application from its user interface. The Citrix
Receiver client software installed on the thin client device allows you to interact with the application GUI, while all the application processes
run on the server.
Citrix Receiver session services are available on the network using Windows Server 2008 or Windows Server 2012 with Terminal Services
and one of the following installed:
• XenDesktop 7.5
• XenDesktop 7.6
• XenDesktop 7.8
• XenDesktop 7.9
• XenDesktop 7.11
NOTE
:
If you use a Windows Server 2003, Windows Server 2008, or Citrix XenApp 5.0 with Windows Server 2008, a Terminal Services Client
Access License (TSCAL) server must also be accessible on the network. The server grants a temporary license, which expires after 120
days. After the temporary license expires, purchase and install the TSCALs on the server. You cannot establish a connection without a
temporary or permanent license.
To congure a Citrix Receiver session, do the following:
1 Log in as an administrator.
2 Access the Citrix Server using one of the following options:
• From the Start Menu, click Citrix Receiver.
• Double-click the Citrix Receiver icon on the desktop.
After you log in to the Citrix server, the Add Account window is displayed.
3 In the Add Account window, enter the server IP address.
4 Click Next.
• For secure connections, enter Fully Qualified Domain Name (FQDN).
• For non-secure connections, enter the IP address.
5 Enter the user credentials, and click Log on.
You can add an account by providing the IP address, and you can view the details of the Citrix Receiver.
Conguring
your Wyse Software thin client 17