Administrator Guide

Table 140. System Conguration
Parameter Description
Serial Port 1 — Serial Port 4 Select the option from the drop-down list. This option determines
how the built-in serial port operates. It avoids resource conicts
between devices by disabling or remapping the address of the port.
Integrated NIC From the drop-down list, select an option to control the on-board
LAN controller. The available options are:
Disabled — The internal LAN is o and not visible to the OS.
Force Disabled — The internal LAN is o and not visible to the
OS.
Enabled — The internal LAN is enabled.
Enabled w/PXE — The internal LAN is enabled (with Preboot
Execution Environment (PXE) boot).
Integrated NIC 2 From the drop-down list, select an option to control the on-board
LAN controller. The available options are:
Disabled — The internal LAN is o and not visible to the OS.
Force Disabled — The internal LAN is o and not visible to the
OS.
Enabled — The internal LAN is enabled.
Enabled w/PXE — The internal LAN is enabled (with Preboot
Execution Environment (PXE) boot).
Enable UEFI Network Stack Check box to install or make available the UEFI Networking
protocols, allowing pre-OS and early OS networking features to use
any enabled NICs. This may be used without switching on the PXE.
SMART Reporting Check box to control the reporting of hard drive errors for
integrated drivers during system startup.
Watchdog Timer Support Check box to enable the Watchdog Timer feature.
Audio Check box to enable the integrated audio controller and uncheck to
completely disable audio controller, including microphone.
Microphone Check box to enable the Microphone.
Watchdog Timer Support Check box to enable the Watchdog Timer feature.
WLAN Region Code Select the WLAN Region code from the drop-down list.
Table 141. USB Conguration
Parameter Description
Top Port 1– Top Port 4 Check box. If USB Port is enabled, the devices attached to this
port is enabled and available for OS and if the USB Port is disabled,
the OS can not see any device attached to this port.
Bottom Port 1 — Bottom Port 2 Check box. If USB Port is enabled, the devices attached to this
port is enabled and available for OS and if the USB Port is disabled,
the OS can not see any device attached to this port.
CANBus/WWAN/Bluetooth/Bottom USB Port 3 and 4 Check box. If USB Port is enabled, the devices attached to this
port is enabled and available for OS and if the USB Port is disabled,
the OS can not see any device attached to this port.
Enable Boot Support Check box to allow the system to boot any type of USB Mass
Storage Devices (HDD, memory key, oppy). USB-aware OS always
58 Managing Group Policies