Administrator Guide
Table 132. Security
Parameter Description
Admin Setup Lockout Check box to prevent users from entering Setup when Admin
password is set.
Chassis Intrusion Chassis Intrusion is a utility that the bios can use to tell you
someone has opened the case. From the drop down list, you can
select any of the following options:
• Disable — Disable chassis intrusion feature.
• Enable — Report intrusions during POST.
• On-Silent — Enable intrusion detection but does not display
any detected intrusion.
UEFI Capsule Firmware Update Check box to control allowing the BIOS updates through UEFI
capsule update packages by the system. Disabling this option
blocks the BIOS updates from services such as Microsoft Windows
Update and Linux Vendor Firmware Service (LVFS).
Table 133. Power Management Settings
Parameter Description
AC Recovery Select the Power state from the drop-down list. This option
species the system’s behavior when AC power is restored after a
AC loss.
USB Wake Support Check box to enable the USB devices to wake the system by
standby.
Wake On LAN / WLAN From the drop down list, select an option to allow the computer to
power up from the o state when triggered by a special LAN signal
or from the hibernate state when triggered by a special wireless
LAN signal.
Block Sleep Check box. If enabled, it blocks the system from entering to the
sleep environment. The Intel Rapid start is disabled automatically,
and the OS power option is blank if it was set to sleep.
Table 134. BIOS Admin Password
Parameter Description
Enable Admin Password Check box to enable BIOS administrator password. Successful
changes to this password take eect immediately.
Table 135. Auto On
Parameter Description
Auto On From the drop down list, set the time of day when you would like
the system to turn on automatically.
56 Managing Group Policies