Administrator Guide
Other
Use this page to specify additional customizations Windows/rmware auto-update for the Embedded PC — Windows.
Table 98. Other Settings
Parameter Description
Enable Windows Auto Update
Check box to enable the Windows automatic update feature.
BIOS Embedded BOX PC 3000 Settings
Use this page to dene BIOS settings such as Wake-On-LAN, Auto-On, and Admin Password and so on.
Table 99. General settings
Parameter Description
Device Notes Enter the device notes such as property ownership tag.
Table 100. System Conguration
Parameter Description
COM1 — COM3 Select the option from the drop-down list. This option determines
how the built-in port operates. It avoids resource conicts between
devices by disabling or remapping the address of the port.
Integrated NIC From the drop-down list, select an option to control the on-board
LAN controller. The available options are:
• Disabled — The internal LAN is o and not visible to the OS.
• Force Disabled — The internal LAN is o and not visible to the
OS.
• Enabled — The internal LAN is enabled.
• Enabled w/PXE — The internal LAN is enabled (with Preboot
Execution Environment (PXE) boot).
Integrated NIC 2 From the drop-down list, select an option to control the on-board
LAN controller. The available options are:
• Disabled — The internal LAN is o and not visible to the OS.
• Force Disabled — The internal LAN is o and not visible to the
OS.
• Enabled — The internal LAN is enabled.
• Enabled w/PXE — The internal LAN is enabled (with PXE
boot).
Enable UEFI Network Stack Check-box to install or make available the UEFI Networking
protocols, allowing pre-OS and early OS networking features to use
any enabled NICs. This may be used without switching on the PXE.
SMART Reporting Check-box to control the reporting of hard drive errors for
integrated drivers during system startup.
Watchdog Timer Support Check-box to enable the Watchdog Timer feature.
46 Managing Group Policies