Administrator Guide

Parameter Description
Extend BIOS POST Time From the drop down list, select an option to create an additional
pre-boot delay which allows the user to see POST status
messages. The available options are:
• 0 seconds
• 5 seconds
• 10 seconds
Table 94. Maintenance Settings
Parameter Description
BIOS Recovery (from Hard Drive) Check box to enable the user to recover from certain corrupted
BIOS conditions from a recovery le on the user primary hard drive
or an external USB key.
Table 95. Reboot Schedule
Parameter Description
Reboot Option Some BIOS settings require system reboot. When Reboot later is
selected, devices reboot when the current time matches the set
time. From the drop down list, select any of the following options:
• Reboot immediately
• Reboot later
• Do not reboot
Embedded PC Policy Settings
This section describes the steps for Embedded PC policy settings.
System Personalization
Use this page to dene system personalization settings such as Time Servers, Time zone name, Log Level, and owner.
Table 96. System Personalization
Parameter Description
Time Servers (NTP Servers) Enter the Time Servers to synchronize local time. Use comma
separated list format.
Timezone Name Select your appropriate Time zone from the available Time Zones in
the drop-down list.
Log Level From the drop-down list, select your preferred log level. The
available options are:
• Info
• Trace
• Debug
• Warning
• Error
• Critical
44 Managing Group Policies