Administrator Guide

Table 32. BIOS Admin Password
Parameter Description
Enable Admin Password Check box to enable BIOS administrator password. Successful
changes to this password take eect immediately.
Table 33. Power Management Settings
Parameter Description
Wake On LAN From the drop down list, select an option to allow the computer to
power up from the o state when triggered by a special LAN signal
or from the hibernate state when triggered by a special wireless
LAN signal.
Table 34. Auto On Settings
Parameter Description
Auto On From the drop down list, set the time of day when you would like
the system to turn on automatically.
Table 35. POST Behavior Settings
Parameter Description
Numlock LED Check box to turn on the Numlock LED when the system boots.
Keyboard Errors Check box to report keyboard related errors when the system
boots.
Fastboot From the drop down list, select an option to speed up the boot
process by bypassing some compatibility steps. The available
options are:
• Minimal
• Thorough
• Auto
Extend BIOS POST Time From the drop down list, select an option to create an additional
pre-boot delay which allows the user to see POST status
messages. The available options are:
• 0 seconds
• 5 seconds
• 10 seconds
Table 36. Maintenance Settings
Parameter Description
BIOS Recovery (from Hard Drive) Select this option to enable the user to recover from certain
corrupted BIOS conditions from a recovery le on the user primary
hard drive or an external USB key.
Managing Group Policies 27