Administrator Guide
Table 8. Security
Parameter Description
Admin Setup Lockout Check box to prevent users from entering Setup when Admin
password is set.
Chassis Intrusion Chassis Intrusion is a utility that the BIOS can use to tell you
someone has opened the case. From the drop down list, you can
select any of the following options:
• Disable — Disable chassis intrusion feature.
• Enable — Report intrusions during POST.
• On-Silent — Enable intrusion detection but does not display
any detected intrusion.
UEFI Capsule Firmware Update Check box to control allowing the BIOS updates through UEFI
capsule update packages by the system. Disabling this option
blocks the BIOS updates from services such as Microsoft Windows
Update and Linux Vendor Firmware Service (LVFS).
Table 9. BIOS Admin Password
Parameter Description
Enable Admin Password Check box to enable BIOS administrator password. Successful
changes to this password take eect immediately.
Table 10. Power Management Settings
Parameter Description
AC Recovery From the drop down list, select an option to specify how the
system behaves when AC power restored after an AC power loss.
The available options are:
• Power O
• Power On
• Last Power State
Wake On LAN From the drop down list, select an option to allow the computer to
power up from the o state when triggered by a special LAN signal
or from the hibernate state when triggered by a special wireless
LAN signal.
Table 11. Auto On Settings
Parameter Description
Auto On From the drop down list, set the time of day when you would like
the system to turn on automatically.
Table 12. POST Behavior Settings
Parameter Description
Numlock LED Check box to turn on the Numlock LED when the system boots.
Keyboard Errors Check box to report keyboard related errors when the system
boots.
Managing Group Policies 21