Administrator Guide

Table 144. Security (continued)
Setting Description
Require User to enter password Allows you to set the VNC password.
VNC Password Allows you to enter the VNC password.
Prompt user on VNC session start Allows you to enable a popup message for accepting the
incoming VNC connection request.
Configuring central configuration settings
Use this page to enter the file server, firmware server, root path, and the corresponding user credentials.
Table 145. Configuring central configuration settings
Option Description
File Server Path Enter the full path of the folder that contains the wlx folder.
Supported protocols include ftp, http, and https.
The default protocol is ftp.
File Server Username Enter the user name to access the file server.
File Server Password Enter the password to access the file server.
Root Path This root path is used to access files on the server. The
directory name /wlx is appended to the root path entry
before use. If root path is not provided, /wyse is considered.
Firmware Server/ Path Enter the full path of folder that contains the firmware
images. Supported protocols include ftp, http, and https.
The default protocol is ftp.
Firmware Server Username Enter the user name to access the firmware server.
Firmware Server Password Enter the password to access the firmware server.
Firmware Root Path This root path is used to access the firmware images on the
server. The directory name /wtx is appended to the root path
entry before use. If the root path is not provided, /wyse is
considered.
Other settings
Use this page to configure the other options.
Table 146. Other settings
Parameter Description
Auto Power-On Allows you to enable the system to boot up when power
is restored without waiting for the user to press the power
button.
Power Button Action From the drop-down menu, select any one of the option to
specify the default action to be performed when you press the
power button.
Managing groups and configurations 71