Administrator Guide

Table 142. Login experience (continued)
Setting Description
Admin Password Enter the password if you want to change the admin
password.
Thinuser Password Enter the password if you want to change the thinuser
password.
Guest Password Enter the password if you want to change the guest
password.
Network
Use this page to configure the network settings.
Table 143. Network settings
Parameter Description
Wireless Connection Name Enter the name of the connection.
SSID Enter the name of the Service Set Identifier (SSID)
connection.
Security Mode From the drop-down menu, select the type of security mode
based on your requirement. Enter the security mode details in
the respective fields.
Security
Use this page to configure the security options.
Table 144. Security
Setting Description
Password Encryption Algorithm Allows you to select the password encryption algorithm. From
the drop-down menu, select any of the following options:
● Base-64
● AES
● Plain-Text
The default value is Base-64.
Enable Gkey Reset By default, the Gkey reset feature is enabled. The factory
reset of the device can be performed when the G key is
pressed during device boot-up.
Install Certificates Allows you to select the certificate which you want to install
on the device.
From the drop-down menu, select the certificates which are
added in the file repository.
Enable SSH Allows you to enable Secure Shell (SSH) on the device.
Allow “root” SSH login Allows you to enable the root SSH login.
Enable VNC Server Allows you to enable the VNC Server.
70 Managing groups and configurations