Administrator Guide

Table 106. Configuring basic settings (continued)
Option Description
Password Select this option to define a password for the connection, if
single sign-on is disabled.
Domain Name Select this option to define a domain name for the connection.
Auto Reconnect Select this option to enable the connection to automatically
reconnect, if the connection is dropped.
Table 107. Configuring RD gateway
Option Description
Use RD Gateway settings Select this option to configure the settings for RD Gateway.
After you enable the option, enter the RD Server name for
the gateway.
From the RD Gateway Logon Method drop-down menu,
specify the credentials to validate the connection with the RD
Gateway:
● Ask for password NTLM
● Smartcard
● Allow me to select later
●
From the RD Gateway Usage Method drop-down menu,
select any of the following ways to use a remote desktop
server:
● Do not use RD Gateway server—All IP addresses
● Use RD Gateway server settings
● Use RD Gateway server settings for Non-Local IP
addresses only
● Use default settings
● Local IP addresses only
Table 108. Configuring display settings
Option Description
Fullscreen Select this option to set the connection window in the full
screen mode.
After the full screen mode is enabled, from the drop-down
menu, select the window size.
Display Connection Bar Select this option to display the connection bar in the
fullscreen mode.
MultiMonitor Support Select this option to enable the multi-monitor support.
Screen Color Depth (in bits) Select this option to define the screen color depth of the
connection.
● RDP 15–Bit High Color
● RDP 16–Bit High Color
● RDP 24–Bit True Color
● RDP 32–Bit Highest Quality
Managing groups and configurations 59